Job Description
Job Description
Purpose of Job:
This position reports to the Weld Machine Group leaders, Weld Machine Supervisor, and Weld Machine Manager and is responsible for performing routine maintenance on welding/assembly equipment, support production by supplying weld machine components needed to run production. Operate mills/lathes, and grinder.
Minimum level of education / training required/certificates/licenses:
This position requires a General Educational Diploma (GED) or High School Equivalency (HSE) diploma.
Minimum experience required:
Machining experience helpful but not required. Print reading knowledge, communication, computer proficient, robotic programming a plus.
Essential Responsibilities:
1. Appropriately maintains all electrodes and weld fixtures in accordance to Preventive Maintenance Check Sheet (PMCS) criteria.
2. Accurately maintains an acceptable level of consumable item inventory at all times (tips, insulation, etc.)
3. Correctly manufactures special weld tips & fixtures when required.
4. Proficiently operate mills, lathes, grinders, and other tool room equipment to produce weld tips and fixtures.
5. Adequately reads calipers and micrometers.
6. Successfully assists Weld Machine associates in setup and troubleshooting of welders and fixtures when needed.
7. Proficiently troubleshoots and repairs equipment.
8. Resourcefully maintains Weld Machine tooling to meet production and quality needs.
9. Notifies Weld Machine Manager and/or Supervisor when replacement parts need to be ordered in a timely manner.
10. Competent in process specs such as job Process Quality Control Table (PQCT) requirements and documentation, creates and updates PMCS and Setup/Teardown Standard Work Instructions.
11. Precisely makes fixtures and recommended tooling for new production and development products which includes assisting tooling and design as needed to run development jobs.
12. Resourcefully recommend to Department Manager when equipment or process change should be considered.
13. Safely operate a tow-motor as required.
14. Professionally and competently participates in Corrective Improvement for lost time on production jobs.
15. Correctly and safely develops robotic welder programs for new jobs and maintains current programs.
16. Thoroughly cleaned work areas, putting all items in appropriate locations.
17. Based on company needs a flexible work schedule and/or overtime is needed.
Tools and Equipment Used:
1. PLEX, CADMAX, Vero International Software Inc. (VISI), Excel, Word, Power-Point
2. Micrometers, calipers, indicators
3. Hand tools, power tools
4. Metal Inert Gas (MIG) welder
5. Plasma cutter
6. Push carts, pallet jacks
7. Standard tool room equipment
8. Scissors lift
9. Robots (various models)
Supervisory Responsibilities:
This position does not supervise others.
Batesville Tool and Die Total Rewards Benefits Package
● Medical, Dental and Vision Insurance
● On-Site Wellness Clinic staffed by outstanding providers to provide no cost treatment and often no
cost prescriptions to employees and their spouses.
● Employee Assistance Program
● Options for voluntary long term disability, accident, critical care and hospital indemnity and
additional life insurance.
● Paid time off
● 9 paid holidays through the year
● 401K with employer contribution Equal Opportunity Employer
Batesville Tool & Die, Inc. is an Equal Opportunity Employer and is committed to creating an inclusive workplace for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic
Why Batesville Tool & Die?
Batesville Tool & Die is a global supplier of precision metal stamping components and assemblies, with tooling, stamping, welding, E-coat and assembly under one roof and plants in Batesville and Tipton, Indiana, Aiken, South Carolina, and Querétaro, Mexico. The dies you maintain here are built and kept in-house for a plant that keeps investing in its presses and its people. What sets BTD apart is the technical, hardworking associates who take pride in doing their best work.
Apply Today
Apply now; it takes a few minutes. Our team reviews every application and will reach out to qualified candidates to talk about the shift and the tool room.
Job Description
Purpose of Job:
This position reports to the Weld Machine Group leaders, Weld Machine Supervisor, and Weld Machine Manager and is responsible for performing routine maintenance on welding/assembly equipment, support production by supplying weld machine components needed to run production. Operate mills/lathes, and grinder.
Minimum level of education / training required/certificates/licenses:
This position requires a General Educational Diploma (GED) or High School Equivalency (HSE) diploma.
Minimum experience required:
Machining experience helpful but not required. Print reading knowledge, communication, computer proficient, robotic programming a plus.
Essential Responsibilities:
1. Appropriately maintains all electrodes and weld fixtures in accordance to Preventive Maintenance Check Sheet (PMCS) criteria.
2. Accurately maintains an acceptable level of consumable item inventory at all times (tips, insulation, etc.)
3. Correctly manufactures special weld tips & fixtures when required.
4. Proficiently operate mills, lathes, grinders, and other tool room equipment to produce weld tips and fixtures.
5. Adequately reads calipers and micrometers.
6. Successfully assists Weld Machine associates in setup and troubleshooting of welders and fixtures when needed.
7. Proficiently troubleshoots and repairs equipment.
8. Resourcefully maintains Weld Machine tooling to meet production and quality needs.
9. Notifies Weld Machine Manager and/or Supervisor when replacement parts need to be ordered in a timely manner.
10. Competent in process specs such as job Process Quality Control Table (PQCT) requirements and documentation, creates and updates PMCS and Setup/Teardown Standard Work Instructions.
11. Precisely makes fixtures and recommended tooling for new production and development products which includes assisting tooling and design as needed to run development jobs.
12. Resourcefully recommend to Department Manager when equipment or process change should be considered.
13. Safely operate a tow-motor as required.
14. Professionally and competently participates in Corrective Improvement for lost time on production jobs.
15. Correctly and safely develops robotic welder programs for new jobs and maintains current programs.
16. Thoroughly cleaned work areas, putting all items in appropriate locations.
17. Based on company needs a flexible work schedule and/or overtime is needed.
Tools and Equipment Used:
1. PLEX, CADMAX, Vero International Software Inc. (VISI), Excel, Word, Power-Point
2. Micrometers, calipers, indicators
3. Hand tools, power tools
4. Metal Inert Gas (MIG) welder
5. Plasma cutter
6. Push carts, pallet jacks
7. Standard tool room equipment
8. Scissors lift
9. Robots (various models)
Supervisory Responsibilities:
This position does not supervise others.
Batesville Tool and Die Total Rewards Benefits Package
● Medical, Dental and Vision Insurance
● On-Site Wellness Clinic staffed by outstanding providers to provide no cost treatment and often no
cost prescriptions to employees and their spouses.
● Employee Assistance Program
● Options for voluntary long term disability, accident, critical care and hospital indemnity and
additional life insurance.
● Paid time off
● 9 paid holidays through the year
● 401K with employer contribution Equal Opportunity Employer
Batesville Tool & Die, Inc. is an Equal Opportunity Employer and is committed to creating an inclusive workplace for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic
Why Batesville Tool & Die?
Batesville Tool & Die is a global supplier of precision metal stamping components and assemblies, with tooling, stamping, welding, E-coat and assembly under one roof and plants in Batesville and Tipton, Indiana, Aiken, South Carolina, and Querétaro, Mexico. The dies you maintain here are built and kept in-house for a plant that keeps investing in its presses and its people. What sets BTD apart is the technical, hardworking associates who take pride in doing their best work.
Apply Today
Apply now; it takes a few minutes. Our team reviews every application and will reach out to qualified candidates to talk about the shift and the tool room.
Weld Assembly Process Technician-2nd Shift in batesville at Unknown Company
This position is listed as full time and onsite.