Stationary Engineer IIResponsible on a shift for the operation and maintenance of a combined high-pressure heating and central refrigeration plant - OR - in a very large facility, has responsibility on a shift for assignments which include either the operation and maintenance of a high-pressure heating plant or refrigeration plant - OR - is assigned to a geographic area of major multi-hospital medical center which requires maintenance and operation of steam reducing stations, ventilation and refrigeration equipment, and various mechanical and electrical equipment and controls.Operates, maintains, repairs, and tests high-pressure steam or hot water boilers, refrigeration, air conditioning, or other auxiliary distribution systems exceeding 500 H.P. in boiler capacity or a total refrigeration capacity of 1200 tons in a plant.Operates, monitors, calibrates, and inspects various types of meters, gauges, automatic recording devices for equipment readings, at periodic intervals or as needed, to verify operating conditions, detect malfunctions/need for repair, and to ensure compliance with regulatory requirements.Uses various electronic, manual, and computer-based control systems to adjust or bring equipment into recommended or prescribed operating ranges, switch to backup equipment or systems, or shut down equipment to perform preventative maintenance at periodic intervals or as needed.Operates, maintains, repairs, and inspects manual and automatic gas and oil-fired high-pressure steam or high temperature hot water boilers.Operates, maintains, repairs, and inspects motors, turbines and steam driven equipment, steam reducing stations, expansion tanks, air compressors, supply and exhaust fans, various kinds of pumps and valves, steam traps, water treatment systems, water heaters and other heating plant auxiliary equipment.Operates, maintains, repairs, and inspects reciprocating, centrifugal or absorption central air conditioning machinery including condensers, evaporators, cooling towers, pumps, purge tanks and related equipment.Adjusts, maintains, tests, and calibrates boiler and air conditioning machinery and mechanical, electrical or pneumatic control instruments and safety devices.Tests boiler water, condensate, cooling tower water, and water from other systems, and adds corrective chemicals or adjusts chemical pumps as needed.Inspects, adjusts, repairs, and maintains refrigeration units for food storage boxes.Inspects, maintains, and adjusts oxygen and vacuum systems for proper pressure and operating conditions.Tests, operates, and maintains emergency diesel-powered electric generating equipment, and synchronizes electronic controls and Automatic Transfer Switches.Inspects and responds to related building control systems, including fire alarm systems, life safety systems, and main electrical distribution stations to ensure proper operating conditions.Monitors, updates, and maintains logs of plant operations and records maintenance and repair work performed, including fuel logs and fuel storage tanks.Work with outside contractors and verify work is satisfactorily completed as assigned.Request quotes from vendors for equipment, parts, tools, or service and generate purchase orders as assigned.RequirementsRequirements to qualify:Option I: Completion of a Stationary Engineer's or Operation/Maintenance Engineer's apprentice program.*Option II: Five (5) years of experience in the operation and maintenance of high or low pressure gas or oil fired boilers and auxiliary equipment, one (1) year of which must have been in the operation and maintenance of refrigeration equipment. One (1) year of classroom training from a trade school, college, a branch of military service, or other equivalent accredited school** in the operation, maintenance, and repair of refrigeration equipment, combustion controls or industrial controls equipment, boilers, or water treatment systems related to power plant operations, in any combination, may be substituted for one year of the required special experience.Physical Class III– Moderate: This class requires that the incumbent stand or walk most of the time with bending, stooping, squatting, twisting, reaching, working on irregular surfaces, occasional lifting of objects weighing over 25 pounds, and frequent lifting of 10-25 pounds.License: A valid California Class C Driver License or the ability to use an alternative method of transportation when needed to carry out job-related essential functions.An Unlimited Steam Engineer's License issued by the City of Los Angeles' Department of Building and Safety. Environmental Protection Agency (EPA) approved Universal Technician Certificate in compliance with Federal license requirements as provided in Chapter V, Section 608.No out of class experience or withholds are allowed for this examination.
Required experience must be fully met at the time of filing and clearly indicated on the application.Special requirement information:* To qualify under Option I, applicants MUST submit a photocopy of the certificate of completion of a recognized Stationary Engineer's or Operation/Maintenance Engineer's apprentice program. Apprenticeship training programs must be recognized by a national, global, or regional accrediting agency, the California State Department of Education, the California State Department of Labor Division of Apprenticeship Standards, or the Council for Private Postsecondary, and Vocational Education.**To receive credit for your education, include a legible copy of your official transcript from an accredited institution within seven (7) days of filing your application. The document should show the number of units and the type of unit system used (e.g., semester, quarter) and be in English. If not in English, then translation is required.
International degrees must be evaluated for equivalency to US standards and indicate the number of units and unit system. Include official copies of all relevant documents. For more information on our standards for educational documents, please visit: (Download PDF reader).If unable to attach required/supporting documents at the time of filing, email the documents to within seven (7) calendar days of filing your online application or you will not receive credit. Please include your name (as it appears on your online application), the examination title and number in the subject of your email.Certificate/License Information: Please make sure to fill out the Certificate/License Section of your application.
In addition, you MUST attach a photocopy of the required license and certificate to your application at the time of filing. Applicants submitted without the required evidence of licensure and certification will be rejected as incomplete.Required license(s) and/or certification(s) must be active and unrestricted, or your application will not be accepted.We do not accept password-protected documents. Ensure documents are unlocked before attaching to your application or sending to the exam analyst.Desirable qualifications:Additional credit will be given to applicants that possess the following desirable qualifications:Additional experience in the operation and maintenance of high or low pressure gas or oil fired boilers, auxiliary equipment and refrigeration equipment.