MCC

Almont, CO • Posted 4 days ago

Onsite Full Time Finishing

Roll Label Finisher Job Description

The Roll Label Finishing operator is responsible for the inspection and cutting of printed roll materials while monitoring tension, labels, and roll count of all finished products. In addition, they are responsible for performing manual and mechanical tasks to install and operate rewinding machinery. Machinery: Arpeco Tracker, Arpeco Tracker Inspector, and Rotoflex.

Essential Functions:

Roll Inspection:

Before beginning work, an appropriate line clearance must be performed.
Inspect using AVT, thread the machine, and begin a “set-up” in the AVT system to obtain a “master sheet”. Obtain approval of the same. This “set-up” will help inspect labels electronically. If the AVT system stops during the run, inspection will be performed visually.
Visually inspect and remove defective areas from printed press rolls.
The following attributes will be monitored during the finishing inspection process: print registration, print-to-cut registration, varnish appearance, die, missing label spaces, splice joints, roll cuts, torn edges, label count, heat-sensitive labels, adhesive crystallization on the printed side of “heat seal” paper.
The finishing inspector will discard any material that does not comply with established standards and customer specifications.
Inspection results will be documented in the (“Arpeco Tracker AVT Report”). Documentation will be placed inside the envelope corresponding to the job.
Challenge/verify the accuracy of the machine counting mechanism.
Maintain product segregation and security
Maintain complete and accurate documentation
Maintain the work area clean and organized
Follow cGMP rules and customer specifications at all times
Follow all safety standards and regulations

Roll Cutting:

Before beginning work, an appropriate line clearance must be performed
Once the required documentation is completed, feed the paper through the machine rewinder and adjust the following equipment and/or instruments: counting mechanism, set knives, splice detectors, inspection light, pattern, and roll tension.
The following attributes will be monitored during the cutting process: print registration, print-to-cut registration, varnish appearance, die, missing label spaces, splice joints, roll cuts, torn edges, label count, heat-sensitive labels, adhesive crystallization on the printed side of “hear seal” paper.
Cut printed rolls into individual rolls according to customer specifications.
Create master labels used to identify finished cut rolls.
Send nonconforming rolls to the “Rework” department for rework. Perform rework if required.
Cut “cores” for each job.
Cutting results will be documented on the form (Arpeco Tracker Slitting/Rewinding Report).

This job description in no way states or implies that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and perform any other tasks requested by their supervisor

For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world’s most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations.

MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at www.mcclabel.com.

If you need assistance or an accommodation in applying, please contact our Human Resources Department at recruiting@mcclabel.com.

Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Additional Information

City: Almont
State: CO
Zip: 81210
Country: United States
Job Type: Full Time
Posted At: 2026-06-08
Job Reference: 26834_6815
Mobile Friendly Apply: No
Category: Finishing
Html Jobs: Yes
Url: https://click.appcast.io/t/f53Xpyn2Zf8zZXLweSwzXd-FcGcgrfECyVpYs14e-YOn2APPgLW-GgSjqK6AGb5N
Body: Roll Label Finisher Job Description The Roll Label Finishing operator is responsible for the inspection and cutting of printed roll materials while monitoring tension, labels, and roll count of all finished products. In addition, they are responsible for performing manual and mechanical tasks to install and operate rewinding machinery. Machinery: Arpeco Tracker, Arpeco Tracker Inspector, and Rotoflex. Essential Functions: Roll Inspection: <ul style="margin-bottom: 0in; margin-top: 0px;"> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Before beginning work, an appropriate line clearance must be performed.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Inspect using AVT, thread the machine, and begin a “set-up” in the AVT system to obtain a “master sheet”. Obtain approval of the same. This “set-up” will help inspect labels electronically. If the AVT system stops during the run, inspection will be performed visually.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Visually inspect and remove defective areas from printed press rolls.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">The following attributes will be monitored during the finishing inspection process: print registration, print-to-cut registration, varnish appearance, die, missing label spaces, splice joints, roll cuts, torn edges, label count, heat-sensitive labels, adhesive crystallization on the printed side of “heat seal” paper.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">The finishing inspector will discard any material that does not comply with established standards and customer specifications.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Inspection results will be documented in the (“Arpeco Tracker AVT Report”). Documentation will be placed inside the envelope corresponding to the job.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Challenge/verify the accuracy of the machine counting mechanism.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Maintain product segregation and security</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Maintain complete and accurate documentation</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Maintain the work area clean and organized</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Follow cGMP rules and customer specifications at all times</li> <li style="margin: 0in 0in 8pt 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Follow all safety standards and regulations</li> </ul> Roll Cutting: <ul style="margin-bottom: 0in; margin-top: 0px;"> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Before beginning work, an appropriate line clearance must be performed</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Once the required documentation is completed, feed the paper through the machine rewinder and adjust the following equipment and/or instruments: counting mechanism, set knives, splice detectors, inspection light, pattern, and roll tension.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">The following attributes will be monitored during the cutting process: print registration, print-to-cut registration, varnish appearance, die, missing label spaces, splice joints, roll cuts, torn edges, label count, heat-sensitive labels, adhesive crystallization on the printed side of “hear seal” paper.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Cut printed rolls into individual rolls according to customer specifications.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Create master labels used to identify finished cut rolls.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Send nonconforming rolls to the “Rework” department for rework. Perform rework if required.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Cut “cores” for each job.</li> <li style="margin: 0in 0in 0in 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">Cutting results will be documented on the form (Arpeco Tracker Slitting/Rewinding Report).</li> </ul> <ul style="margin-bottom: 0in; margin-top: 0px;"> <li style="margin: 0in 0in 8pt 0px; line-height: 115%; font-size: 12pt; font-family: Aptos, sans-serif;">This job description in no way states or implies that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and perform any other tasks requested by their supervisor</li> </ul><div style="mso-element: para-border-div; border: none; border-bottom: solid windowtext 1.5pt; padding: 0in 0in 1.0pt 0in; background: white;"> For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world’s most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at <a rel="noopener" href="https://www.mcclabel.com" target="_blank">www.mcclabel.com</a>. If you need assistance or an accommodation in applying, please contact our Human Resources Department at <a rel="noopener" href="mailto:recruiting@mcclabel.com" target="_blank">recruiting@mcclabel.com</a>. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. </div>
Cpa: 4.41
Cpc: 0.22

Back to Job Search

Finishing Finisher

Additional Information